How To Get Bumps Out Of Area Rugs

Area rugs look good, feel soft, and are nice underfoot.  It’s an essential part of any home décor but can be difficult to maintain. They help create a sense of style and enhance the aesthetic appeal of a room. But a little bump on the area rug can ruin the look. So how to get bumps out of area rugs?

Are you looking for a way to remove those annoying bumps in your area rugs? Well, you have made the right decision by coming here.

How To Get Bumps Out Of Area Rugs

In this article, we will help you find out how to get rid of bumps in area rugs and how they affect the look of your rug.

With Equipment:

1. Use the Double-Sided Tape

Using double-sided tape to get bumps out of area rugs is the most effective way and you should definitely try it. You just need to apply the tape on the rug’s back edges, four corners, and center of it. This won’t let any bumps, lumps or wrinkles form and also prevents the corners from curling.

2. Use the Carpet Kicker or Power Stretcher

If you can’t get bumps from both sides with double-sided tape, then try the carpet kicker or power stretcher. This equipment is used for stripping out the wrinkles from area rugs so they can be turned over and spread flat.

3. Steam Cleaner

This is an effective way to get bumps out of area rugs but it can be expensive and also time-consuming.

The main thing about steam cleaners that you have to keep in mind is that the warm water used for cleaning should not exceed 180 degrees Fahrenheit, either it will damage fibers or melt them permanently if they are synthetic or blended.

Fill the steam cleaner, turn it on, move the steam nozzle around so that you can get into all areas of it. Keep moving it until all the bumps are out of the rug.

4. Rug Pad

To get bumps out of area rugs, rug pads can be helpful. But, it is important to use the correct type of rug pad for your specific rug. Not all rug pads are effective on all types of rugs.

Find your best match and put it under your rug. A rug pad will help the area rug to stay flat in its place, prevent any folding or stretching and as a result, you will get bumps, dents, or wrinkles-free area rugs. 

With Stretching Techniques:

1. Place a Heavy Object

Placing a heavy object can also help in getting back the rug’s original shape. Keeping a heavy object like a table, plants, books, etc. for a long time will remove the bumps. But don’t think it will happen in a few minutes.

You have to keep a heavy object for a few hours or overnight, only then you will show the effects. Place something heavy, take turns flipping over for about 10-15 minutes to loosen carpet fibers, then flip back over and add weight again. This process will continue until you reach your desired width.

2. Reverse Roll the Rug

The reverse rolling technique is an easy way to “roll” the carpet back into shape. This method works especially well because it doesn’t require much of a muscle strain, and can be applied many times until you achieve just enough curvature in order to prevent over compressing.

Roll the area rug gently but keep the face against wallpaper, let it stay rolled like this for overnight or a day. After those few hours, use a flat surface and roll up the rug once again. Repeat this process until you achieve your desired bumps-free rug.

With Moisture Techniques:

1. Use Ice Cubes

Using ice cubes to get bumps out of area rugs is as effective as removing furniture dents. Take a few ice cubes, place them over the bumps area, and allow them to melt.

It will take a long time like a few hours to melt and absorb by the rug’s fiber. So it’s better if you can leave it overnight.

How Will an Ice Cube Remove the Bumps out Of the Area Rug?

The ice cubes will melt, as usual, then the rug fiber will soak them and swell slowly. After the fiber has absorbed all the moisture, it will dry and will get back in its original shape.

As we don’t know how much this process will take we can wait overnight, and in the morning we can use a dry microfiber cloth and dab the treated area to know whether it’s dried or not.

2.Place the Rug in the Sun

We know sunlight can damage our expensive area rugs, but do we also know it can get bumps out of area rugs? Yes, you heard me right, sunlight can help us in getting bumps out of our area rugs.

How? Nothing much, place the rug upside down in a place that doesn’t get direct heat from the sun or too much light like a window sill.

Sun heat will make the rugs amazingly soft, and the bumps will be easily removed.  and due to placing the rug upside down, it will also be safe from discoloring and other damages. 

3.Use an Iron

Using an iron is the fastest and most effective way to get bumps out of area rugs. But you have to use it in the right way, or it can cause more damage. So how to use an iron to get a bump out of the rug?

Place the rug flat, now keep a dampened cloth or towel on top of it, heat the iron, and press it slowly. Don’t keep the iron in a place for more than 10 seconds. Keep it moving around all the time, heat can melt the rug’s fiber.

Why Do the Bumps in The Area Rugs

Bumps in the area rugs could be caused by a variety of things. It is possible that there is something caught underneath the rug that is causing it to bunch up. In this case, you will need to remove whatever is underneath the rug and replace it with a new one.

Another possibility is that there are insects living in the rug and they are causing the bumps. In that case,  you will need to remove the rug and examine it closely. You may also need to treat the rug with an insecticide if there are insects living in it.

One possibility is also that there may be a hole in the rug. If this is the case, you will need to get it fixed as soon as possible. Another possibility is that there may be something underneath the rug that is causing the bumps. 

Prevent Future Bumps

There are a few things that you can do to prevent future bumps in your rug. 

The first thing is to vacuum your rug regularly. This will help remove any dust, dirt, or debris that may be causing the bumps. 

Another important step is to keep your rug clean. Cleaning it regularly will help remove any built-up dirt and oils that may be causing the bumps. 

Next, you can place a rug pad underneath your rug. This will help reduce the amount of friction that is created when you walk on the rug and will also protect it from damage. 

If you notice any bumps or indentations in your rug, don’t hesitate to get it fixed as soon as possible. A professional carpet cleaner can help restore your rug to its original condition and eliminate any future bumps.

Or it may be time to have your rug replaced. A new rug will not only solve the problem of bumps but will also increase the lifespan of your rug by protecting it from moisture and dust mites.

Frequently Asked Questions

How Do You Flatten a Rolled up Rug?

To flatten a rolled-up rug you can use a rug stretcher. This is a machine that you place the rolled-up rug on and then push and pull until it is flat. It’s important to make sure that the stretcher is level, otherwise, the rug will not be flattened evenly. 

Can You Iron a Rug to Flatten It?

Yes, you can iron a rug to flatten it. But rugs are made of a variety of materials and each one will react differently to heat. In some cases, irons can actually cause the rug to become damaged or even unravel. So while ironing you must place a dampened towel on top of the rug and then iron it in low heat.

How Long Does It Take for A Rug to Flatten?

It depends on the type of rug, and what method you used to flatten it. Rugs that are made from synthetic materials or those that are tightly woven will take longer to flatten than rugs made from natural materials. Usually, a rug takes a minimum of a week and maximum of a month to flatten.

Conclusion

Area rugs can have a variety of problems, bumps are one of them. If you notice any bumps on your rug follow any of the mentioned methods we shared above. All the methods we have shared are effective in removing bumps from area rugs.

If the mentioned methods don’t work well, do not hesitate to contact a professional carpet cleaner immediately because if left untreated, it can cause irreversible damages.